REMOTE PROGRAM INSTRUCTIONS FOR MARANTEC Synergy 200 series operators
LEARN HOW TO PROGRAM A REMOTE INTO A MARANTEC SYNERGY 260, 270 & 280 MODEL OPERATOR
If you look at the back of the garage door operator you'll see three buttons: "+", "-" and "P" buttons along with an LED display that shows different icons. You'll use these three buttons and the LED display to program the remote into the operator by using the following instructions for the Marantec Synergy 200 Series models:
2. When the display of the "Door Open Position" on the LED display illuminates release the button.
3. You are now ready to program a remote. Press & Release the "P" button until the "Remote Control" icon on the LED display is illuminated.
4. The opener can now learn the code of the remote. Press & hold the button on the remote. Release the remote transmitter button.
5. The opener has learned the remote code. Now press & release the "P" button. This stores the code in the memory. The "On" icon should now be illuminated on the LED display and the opener is ready for operation.
If you have any questions don't hesitate to contact us at: [email protected]
Purchase replacement remotes for your Marantec Synergy operator now:
One of our 2 remotes for our Synergy 260 opener was lost/stolen. How do we change the code so the lost/stolen remote no longer works? What is the model number and cost for a replacement remote
If you don't plan on replacing the lost or stolen remote then you can change the code on the existing remote and then program that remote back into the operator. The lost or stolen remote will then no longer work with the operator. You can watch a short video on how to change the remote code here: https://youtu.be/wwochJ7C0XQ