Blog Home

Here are the instructions on programming a garage door remote to the Marantec model Q7500 and model Q7700 operators. You'll only use the instructions below if you don't have any remotes programmed to the operator. Once you have one remote programmed into the opener using the following instructions you can then program a keypad or additional remotes using a programming jumper.

Programming a remote for a Marantec opener can be difficult without instructions. Below are instructions on programming a garage door remote to the Marantec model M4500 and model M4700 garage door openers. We will go through each step you need to do in order to program the Marantec remote to your Marantec opener. You'll only use the instructions if you don't have any other remotes programmed to the operator. The reason for this is because the Marantec opener radio receiver can only hold the code of one remote. Additional remotes copy the code of the one programmed remote so

Your old garage door seal is hardened, cracked and torn so you figured out what seal you need to replace it and purchased new seal but you're not sure on how to get started in replacing it. Read the following blog post for tips on installing the new bottom seal on your garage door.

The bottom seal on a garage door can hard, stiff or torn over the years and need replaced. The problem many face is trying to figure which seal on the market will work with their garage door. Read the following post to get tips on how to measure your seal and figure out which one will work with your garage door.

Do you have a Marantec Mac-Lift III Elite 2007 garage door opener with a broken or missing garage door remote?  Marantec no longer offers the original remotes listed here:

• ML-1401, ML-1402, ML-1404, ML-2401, ML-2402, ML-2204 (40MHz frequency)
•  ML-1391, ML-1392, ML-1394,ML-2391, ML-2392, ML-2394 (390MHz frequency)

If you have one of the discontinued remotes listed above then 
there is a simple solution to finding a replacement remote.