8030280 10' Marantec Opener Replacement Belt with Tab
Replacement belt for Marantec operators (for 10' operators)
Marantec garage door opener belt may wear out over time and need
replaced. The 8030280 Replacement Belt is the perfect replacement to get
your Marantec belt opener back up and running again. To make sure
you're ordering the correct belt measure the overall length of your
existing belt. If your belts measures around 297-1/2" then you have a
10' opener and will use this belt. If your belt is shorter and measures
226-1/2" then use the 7' Belt (8030278) or the 8' Belt (8030279) if it measures 250".
belt has a Travel Limit Tab attached to it. The tab is what triggers
the reference switch and tells the opener when to stop. Check the Belt Connector while you are replacing the belt. If it's worn or cracked it should also be replaced.