8030278 7' Marantec Opener Replacement Belt with Tab

8030278 7' Marantec Opener Replacement Belt with Tab

Replacement belt for Marantec operators (for 7' operators)

The Marantec garage door opener belt may wear out over time and need replaced. The 8030278 Replacement Belt is the perfect replacement to get your Marantec belt opener back up and running again. To make sure you're ordering the correct belt measure the overall length of your existing belt. If your belts measures around 226-1/2" then you have a 7' opener and will use this belt. If your belt is longer and measures 250" then use the 8' Belt (8030279) or the 10' Belt (8030280) if it measures 297-1/2".

The belt has a Travel Limit Tab attached to it. The tab is what triggers the reference switch and tells the opener when to stop. Check the Belt Connector while you are replacing the belt. If it's worn or cracked it should also be replaced.

• Overall Belt Length = 226-1/2"
• Travel limit tab attached to belt
• For Marantec opener models: M4500, M4700, Q7500, Q7700, Q7900, M4500e, M4700e, M4900e, Synergy 260, Synergy 270, Synergy 280, Synergy 360, Synergy 370, Synergy 380, Synergy Solo