3" Black 1/4" T-style Heavy Duty Rubber Bottom Garage Door Seal (Raynor)

Question

Q: Will this fit a Raynor Decade I and II residential steel door. Also existing strip measures about 2”. Thank you.

Asked by: Peter Hoelter - 5/5/2020

Q: Going to purchase the recommended door bottom seal for the Raynor Classic. What is the best way plug the sides so the seal doesn't slide slide?/ Thanks.

Asked by: Ralph - 3/1/2021

Q: Dothe seals come 2-3 inches longer, like 12foot 3 inch?

Asked by: Allan - 11/22/2021

Q: is part #325TBK8f made of rubber or epdm? Also is the 16 foot piece that i need a little larger than 16 feet?

Asked by: jon - 12/3/2021

Q: Can you get this in grey?

Asked by: Linda Giggey - 9/13/2024

Questions about this item? Ask here.

Accepted Answer

Yes. All of the Raynor steel doors have used the 1/4" T-style seal. When laid flat your seal will probably measure closer to 3" wide since that's the standard size Raynor uses (but the door thickness is going to be 2" for a Decade I & II door).

Accepted Answer

We cut the seal 5-6" longer than what you order. So if you order a 9' piece then you'll actually receive a 9'6" piece. That will leave you with 3" extra on each end. You can then tuck the seal back into itself in the retainer on each end and this will keep the seal from sliding out.

Accepted Answer

A: We cut the seal 5-6" longer so if you ordered a 12' piece of seal then you'd actually receive 12'6"

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Administrator (11/22/2021)

Accepted Answer

A: It is EPDM synthetic rubber.
We cut the seal 5-6" longer than what you order so if you order 16' seal then you will actually receive a 16'5" to 16'6" piece of seal.

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Administrator (12/3/2021)

Accepted Answer

A: No, the rubber seals are only available in black. If you want seal then you'd need to get a vinyl seal.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Brian (9/13/2024)

3" Black 1/4" T-style Heavy Duty Rubber Bottom Garage Door Seal (Raynor)

Choose Options

Average Customer Ratings

Related Items

Recently Viewed Items

Mailing List