DT-2D Linear Delta-3 2-button Garage Door Remote
The
Linear DT-2D 2-button remote transmitter can activate two DR Linear
Delta 3 radio receivers. There are two sets of 8 DIP switches each in the Linear DT-2D remote that are matched to the DIP switches in the Delta 3 radio
receivers. If the switches are set the same in the remote and radio
receiver then the remote is able to activate the receiver which tells
the garage door opener to open or close the garage door. The Linear Delta-3 Radio Receiver with DT-2D Remote are commonly found and used on older garage door operators such as the Raynor R-Series, Raynor Flitestar, Overhead and Genie operators for the 1980's and 1990's, especially in a garage with two operators and Delta-3 radio receivers on each operator. Easy to install, reliable and easy to program, the Linear Delta-3 radio equipment is a popular choice.
Remove the screw on the back cover of the remote to access the two sets of DIP switches. The switches in each set are then set to match the position of the switches on the radio receivers.
Features
- Linear 2-Button garage door opener remote
- Model no.: DT-2D
- Part no.: DNT00017A
- (2) sets of 8 programmable coding switches
- Frequency: 310 MHz
- Codes: 256 (set by dip switches)
- Includes 9-volt battery, visor clip & instructions
- Dimensions: 2.16 x .95 x 3.75 inches
Compatibility
Compatible with the Linear DR Delta-3 Radio Receiver along with the following Linear Delta-3 receivers: DR3A, DR-2, DR-4, DRA, DRA-4, DRM, DRQP, GRD and GRD-2.
Compatible with the DT-1 remote, DTKP Wireless Keypad, DC-DT1 DigiCode remote and Dolphin Wireless Keypad.
The
DT-2D Linear Delta-3 Remote was used on some of the older Raynor garage
door operators such as the R170/270, R160/260, R150/250 and R130/230
model electric openers.
Learn how to program the remote by watching a short video here
[ITEMPRICE]