Your Price:
$17.52
Brand: Proseal
Part Number: 55001
Availability: IN STOCK / 2.19 per ft.

Description

3.5" Black 1/4" T-style ProSeal PVC Bottom Garage Door Weather Seal

(priced per pre-cut length)

Are you looking to replace the worn out or torn bottom garage door weather seal on your garage door? We stock the ProSeal 3-1/2" wide durable weather resistant black PVC replacement bottom garage door seal that forms a U shape with 1/4" T-style ends. Installing new vinyl bottom garage door seal is an excellent way of keeping out unwanted water and dirt in your garage. The 3.5" wide bottom door seal works in Raynor garage doors and other residential & commercial garage doors that have door bottom astragal retainers that accept a 1/4" T-style bottom garage door weather seal.

Features

  • 3-1/2" wide black pvc bottom garage door weather seal
  • Seal slides into bottom garage door section astragal retainer
  • Priced per pre-cut lengths from 8' to 40' 
  • Seals are cut 5" to 6" longer (at no extra charge) so there's extra seal on each end to tuck back into the retainer
  • Fits Raynor garage doors and other brands that use a 1/4" T-style bottom garage door seal

Measurements

The actual measurement of the "T" part of the seal is between .23" and .25" due to manufacturing tolerances. The seal has been tested & works in all Raynor brand models and some Gadco door models. You should measure the "T" on your existing seal with a caliper to make sure this seal will work in your door. If you're unsure if this seal will work in your garage door then you might consider purchasing the Seal Sample Pack here and test the samples in your door to see how they fit.

The width of the seal is close to 3-5/8" in width. A common question is "Can I use a seal that is larger (or smaller) in width than my current seal?". The answer is yes you can. The most common width is 3" wide but a door that uses 3" wide seal could also use a 3-1/2" or 4" wide seal. The wider seals will give the seal a little more coverage while sealing the garage door to the floor. Going up to a 4" wide seal should only be considered if the floor is out of level or broken and that extra seal is required to seal the door otherwise the seal may be too "floppy" and fold over on itself if it's not needed.

Door Compatibility

The 3-1/2" Black T-style vinyl garage door seal is compatible in garage doors that use a 1/4" T-style seal. This includes all of the Raynor brand models and some of the Gadco brand models. We recommend that you measure the "T" part of your seal with a digital caliper to confirm compatibility or purchase the Seal Sample Pack to test the seal in your garage door before purchasing a full length piece of seal.

Compatible with the following Raynor models: Aspen Series (AP200LV, AP200, AP138), Tradition Series (Masterpiece, ShowCase), Advantage Series (TradeMark, BuildMark), Discontinued Models (Classic, Decade I & II, Affina, Centura, Relante, Prisma, Charleston); Commercial Models: TC Series (TC320, TC300, TC200), ThermaSeal Series (THM220, TM200, TM175), SteelForm Series (S16, S20, S24, S24-C), Discontinued Models (Tri-Core, Styleform Standard & Basic)



Installation Tips

Two-Person Job: For a smooth installation process, enlist the help of a second person-one to pull the seal through the retainer, and the other to feed the seal into the retainer.
Lubricate for Ease: Applying soapy water or a lubricant to the retainer beforehand can significantly ease the installation process.
Helpful Blog Posts: Visit our blog for comprehensive guides on installation and choosing the right seal for your garage door, including "Bottom Garage Door Seal - Installation Tips" and "Bottom Garage Door Seal - Measuring & Buying Tips".






Related Items