The New Program Connector is probably the number one thing that customers misplace or lose for their Marantec garage door opener remotes. The programming connectors are so small that they're easy to misplace. It's best if you tape the programming jumper to the top of the wall control station so you'll know where to look for it when you need it. The 3-prong programming connectors are only needed when additional remotes are being programmed to the operator. You connect a programmed remote to a new remote using the 3-prong connector and transfer the code from the programmed remote to the new remote.
A Visor Clip is included and is compatible with the 382 Digital 2-Button Remote, 384 Digital 4-Button Remote along with the older "M3" remotes (M3-2312, M3-2314 and M3-2342). The clip slides into the back of the remote so it can be secured to the visor in your car.
*NOTE: If you purchase a new 382 Digital Remote or 384 Digital Remote from us then the visor clip and programming jumper will be included with the remote.