Linear MGR
MegaCode 1-Channel Radio Receiver
The Linear MGR MegaCode Radio Receiver
is a top-tier solution for enhancing the security and functionality of your
automatic gate openers or garage door operators. This receiver is part of the
MegaCode series of digital receivers, known for their reliability and advanced
security features. The radio receiver can be used on garage door operators or
gate operators with memory storage to hold up to 40 remotes. By utilizing the
Linear MegaCode technology, the radio receiver is compatible with all of the
Linear MegaCode remotes and wireless keyless entry.
MegaCode uses a frequency of 318MHz
and features over one million radio codes to all but eliminate any possibility
of code duplication. It offers simplified programming via the receivers learn
mode. The radio receivers also uses auto voltage sensing so the receiver can
recognize the operators correct voltage and eliminate any chance of damage to
the operator or radio receiver from running off the wrong voltage.
Key Features
- MegaCode Technology: Each receiver and transmitter is
programmed to one of over a million different codes, ensuring that your
system is secure and protected against unauthorized access.
- Easy Installation: Comes with a 9-inch local antenna,
a three-foot 75 ohm coaxial cable, and a bulkhead connector for easy
mounting outside the gate operator enclosure.
- Versatile Power Options: Operates on a wide range of
voltages, from 12-30 volts AC or 10.5-30 volts DC, typically powered
directly from the gate operator.
- High Capacity: Capable of remembering up to 40
different transmitters, making it suitable for both residential and
commercial setups.
- Durable Design: Engineered to withstand various
environmental conditions, ensuring long-lasting performance.
- User-Friendly Programming: Transmitters are pre-set with
unique codes at the factory, and the receiver is easily programmed to
these transmitters.
- Compatible Controls: MegaCode remotes MCT-1, MCT-3, MCT-11,
ACT-21, ACT-22, ACT-34B, MDT-1B, MDT-4B, MDTK Keypad, MTR-1, MTR-3, MTS-1,
MTS-3, NMTK Keypad
SPECS
- Single Form "A" (normally open)
relay rated at 30 Volts AC/DC up to 5 Amps
- Supplied with whip antenna and 3 feet of
coaxial cable
- Memory: storage up to 40 MegaCode remotes
- Power: 12 - 30 VAC or 10.5 - 30 VDC
- Codes: 1,000,000 + (MegaCode format)
- RF Frequency: 318MHz
- Channels: 1-Channel
- Dimensions: 3.625" W x 5.25 H x 1.5
D
- Part No.: DNR00104
- Model: MGR