Linear Curved and Straight Garage Door Opener Door Arm Kit
If you need a garage door operator arm for your Linear residential garage door operator then check out the Linear replacement garage door arm kit. The kit includes the lower curved (bent) arm, upper straight arm, door bracket, bolts to connect the two arms, screws to secure the door bracket to the door and the clevis pins to hold the arm to the door bracket and the opener trolley. The door bracket is attached to the
center of the garage door with the screws (included) and the straight and curved
arms are bolted together with included hex head bolts and nuts (included). The
curved part of the opener arm is attached to the door bracket with the
included clevis pin and the straight arm is connected to the opener trolley with the included clevis pin. The Linear Garage Door Opener Arm Kit will work in other brands where the trolley uses a 5/16" clevis pin (be sure to check with opener manufacturer for compatibility).
Kit Includes The Following:
- (1) 267966 Straight door arm (16-3/4"x1")
- (1) 267967 Curved door arm (14-7/8"x5-3/8"x1")
- (1) Linear Door Bracket w/ (4) screws
- (2) 5/16"x1" hex head bolts w/ nuts (connect arms together)
- (1) 5/16"x1-3/8" clevis pin & hair pin (door bracket clevis)
- (1) 5/16"x1-1/8" clevis pin & hair pin (trolley clevis)
- (1) Red trolley emergency pull cord