Residential Garage Door Bottom Corner Brackets (pair)
The garage
door bottom brackets attach to the bottom corners of the bottom section.
The corner brackets hold the bottom roller in place and the extension
spring cable or torsion spring cable is attached to the bracket. It's
not uncommon after many years and due to the fact that the bottom
brackets are next to the garage floor water & moisture can cause the
brackets to rust and eventually break.
- Garage door bottom corner brackets - for residential or light commercial garage doors
- Compatible with garage doors up to 2" thick
- Milford pin cable attachment (inside hookup loop style cable attachment)
- For use with 2" track
- Sold as a pair
- 5-11/16"L x 2-11/16"W x 1-1/4"flange
If you are going to replace the bottom brackets on your garage door please make
sure to remove the spring tension on the garage door before removing the
brackets as they are under extreme pressure from the cable attached to
the brackets. If you are not comfortable doing this type of repair
please contact a professional.