Marantec Garage Door Remote New Programming Connector

69625 Marantec New Programming Connector

The Marantec New Programming Connector is used to transfer the code from a programmed remote to a new remote. Marantec garage door openers are different from other brands in that they only hold the code for one remote. Then when you get additional remotes the code from that one programmed remote is copied on the new remotes by connecting the two remotes with the programming connector and transferring the code. By doing it this way you are able to add as many remotes to the operator that you want.

  • Marantec Garage Door Remote New Programming Connector
  • For programming new "M3" Series Remotes & Keyless Entry
  • Used to transfer the code from a programmed M3 remote to another M3 315MHz remote or to transfer the code from an M3 remote to a 382 or 384 Digital Remote. Also used to transfer code between the new Digital (382 & 384) Remotes.
  • Also used to program a M3-631 (obsolete) Keyless Entry. Programming jumper not needed to program the new M13-631 Keyless Entry.
  • PLEASE NOTE: ALL NEW 382 Digital Remotes, 384 Digital Remotes and M3-3313 Remotes PURCHASED from us at the Garage Door Zone INCLUDE A #69625 New Programming Connector.

Watch the video below to see how to use the New Programming Jumper

 

If you need programming instructions using the New Programming Connector you'll find them here on our Support Manuals site

  • Manufacturer: Marantec
69625 Marantec Garage Door Remote New Programming Connector
Click To Enlarge
  • Item #: 69625
  • Manufacturer: Marantec
  * Marked fields are required.
Qty*
Price $5.95
Availability In-Stock

Best Values

Related Items

Reviews (0) Write a Review
No Reviews. Write a Review