MCT-3 Linear 3-button MegaCode Remote 318MHz (p/n DNT00089)
the Linear MCT-3 MegaCode transmitter is programmed to a Linear garage
door opener or Linear gate opener it uses a unique code when the remote
button is pressed. Each transmitter is permanently coded at the factory
and the radio receiver is programmed by learning the transmitters unique
code. Each button on the 3-button MCT-3 remote can be programmed to a
different Linear garage door opener or gate opener.
comes with two (2) 2032 3-volt lithium batteries. The red light on the
Linear remote will glow red when one of the buttons are pressed and
sending a signal. If the red light is dim then the remote batteries
should be replaced. Under normal use the batteries should last 3 years.
Linear MCT-3 remote is also compatible with Homelink. If your vehicle
has the Homelink buttons (refer to your car owners manual) then the
Homelink buttons in the car can be programmed using the Linear MCT-3
remote after it has been programmed to the garage door opener. You can
use the Homelink website here to find the specific programming instructions for your car and garage door opener.
Need to troubleshoot, adjust or program your Linear opener but don't have a manual? Check out our Support Manuals site where you can download Linear opener manuals.