M3-543 Marantec Wall Control Panel

Question

Q: What does the button illumination represent? When is it on/off/blinking?

Asked by: Roi - 12/31/2020

Q: Is this compatible with the martin motor DC 3700 e?

Asked by: Brent - 5/26/2020

Q: I have a viper X-70 model garage door opener and I need to replace the wall control panel. The manual lists the model number as M3-543VP. Will the M3-543 Marantec Wall Control you list for sale be compatible with my Viper X-70 system? Thank you.

Asked by: Jeff - 11/5/2019

Q: Este abridor lo puedo usar en una puerta martin modelo dc 3700? (Can I use this on a Martin model DC 3700?)

Asked by: Angel Loubriel - 7/4/2020

Q: Thus this wall remote work on omega-matic om4500 garage door opener

Asked by: Eliseo - 2/24/2022

Q: Will this wall control work with Elite 2007 opener?

Asked by: Todd - 4/1/2022

Q: My garage has three Marantec 4500 units, the center wall control unit has a flashing light but still functions. Since this light began flashing, the remote control no longer opens/closes the garage door. The sensors have been checked and they are aligned. What could be causing the flashing light and the remote to stop working?

Asked by: Bob - 7/23/2022

Q: Will this wall unit work with a precision garage door opener PDS 4700e

Asked by: Kevin McAllister - 11/7/2022

Q: Will this remote work with a M4700e opener?

Asked by: Mrs K - 4/5/2023

Q: Will this wall control work with the marantec synergy 370?

Asked by: Jen - 10/8/2023

Questions about this item? Ask here.

Accepted Answer

If the light is on solid then it means the wall station has power. If the light is on and blinking that means that the Lock Out (or Vacation) Button was pressed & the remotes are locked out. If the light is out then there's no power to the wall station.

Accepted Answer

A: Yes it is.

Was this answer helpful? 1 of 3 Customer(s) found this Answer helpful.

Answer provided by: Administrator (5/26/2020)

Accepted Answer

A: Yes it will. The Viper operators are made by Marantec.

Was this answer helpful? 0 of 2 Customer(s) found this Answer helpful.

Answer provided by: Administrator (11/5/2019)

Accepted Answer

A: Sí tu puedes (Yes you can)

Was this answer helpful? 0 of 2 Customer(s) found this Answer helpful.

Answer provided by: Administrator (7/5/2020)

Accepted Answer

A: Yes it is

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Administrator (2/24/2022)

Accepted Answer

Yes, they're compatible with the Marantec Elite 2007 operator.

Accepted Answer

There is a Lock Out function on the wall station which locks out the remotes. It sounds like you pressed it by mistake. It's the top button on the wall station (symbol of a lock next to it). Press & hold that button for a couple of seconds to turn the Lock Out function off and your remotes should work again.

Accepted Answer

Yes it will. The PDS4700e model opener is made by Marantec.

Accepted Answer

This is not a remote. The M3-543 is the wall control station that is wired to the operator and has a open/close button, light button and vacation button. It is compatible with the M4700e model and all other Marantec model operators.

Accepted Answer

Yes. The M3-543 Marantec Wall Control Panel is compatible with all of the Marantec operator models.

M3-543 Marantec Wall Control Panel

Average Customer Ratings

Related Items

Recently Viewed Items

Mailing List