3" Gray 1/4"T Bottom Garage Door Seal (Raynor/Gadco)

3" Gray 1/4" T-style Vinyl Bottom Garage Door Weather Seal (priced per pre-cut length.)


Are you looking to replace the worn out or torn bottom garage door weather seal on your garage door? We stock the 3" wide gray vinyl replacement bottom garage door seal that forms a U shape with 1/4" T-style ends. Installing new vinyl bottom garage door seal is an excellent way of keeping out unwanted water and dirt in your garage. The 3" wide bottom door seal works in Raynor garage doors, GADCO garage doors, and other residential & commercial garage doors that have door b3" gray vinyl garage door bottom sealottom astragal retainers that accept a 1/4" T-style bottom garage door weather seal.

If you have an uneven garage floor with gaps between the bottom section and the garage floor you may want to consider using the 4" wide bottom garage door seal. If you have a good level garage floor then use this 3" seal which is more commonly used.

  • 3" wide gray vinyl bottom garage door weather seal
  • The "T" part of the seal measures 1/4"
  • Seal slides into bottom garage door section astragal retainer
  • Priced per pre-cut lengths of 8',9',10',11',12',13',14',15',16',17',18',19',20',21',22',24',26',28',30',32',34',36',38', and 40' 
  • Seals are cut 5" to 6" longer (at no extra charge) so there's extra seal on each end to tuck back into the retainer
  • Fits GADCO garage doors, Raynor garage doors and other brands that use a true 1/4" T-style bottom garage door seal
  • Fits the following Raynor models: Aspen Series (AP200LV, AP200, AP138), Tradition Series (Masterpiece, ShowCase), Advantage Series (TradeMark, BuildMark), Discontinued Models (Classic, Decade I & II, Affina, Centura, Relante, Prisma, Charleston); Commercial Models: TC Series (TC320, TC300, TC200), ThermaSeal Series (THM220, TM200, TM175), SteelForm Series (S16, S20, S24, S24-C), Discontinued Models (Tri-Core, Styleform Standard & Basic)
  • Note: due to tolerances in manufacturing the actual width of the seal can vary from 2.775" to 3"


  • If you need seal for a Clopay, CHI, Ankmar, Amarr or other brand then you should get a seal with a 5/16" "T" (some seals are called 1/4" but are actually 5/16"). For that application consider using the 4" wide 5/16" T-style rubber seal


  • Installation tip: have two people to install - one to pull the seal through the retainer and the other to feed the seal into the retainer. It's also a good idea to put some soapy water or lubricant on the retainer before trying to pull the vinyl seal through.
  • Check out our Support Manuals site article - "How To Replace Bottom Garage Door Seal" for more helpful tips on installation and finding the right seal for your garage door


   3" gray vinyl bottom seal measurement


3" Gray Vinyl Garage Door Bottom Seal. Replacement bottom weather stripping for Raynor garage doors, Gadco garage doors and other brands using a 1/4" T-style seal.
Click To Enlarge
  • Item #: 325TGY
  * Marked fields are required.
Price $7.60

Related Items

Reviews (0) Write a Review
No Reviews. Write a Review