M3-2312 Marantec Mini 2-Button Remote

Marantec Mini 2-Button Remote 315Mhz / Model #: M3-2312

(Replaces older model ML-1312V)

Note: if you have an older ML-1312V remote then you'll need to add the #65853 Old-to-New Programming Jumper to your order.

• M3-2312 Mini Remote is small enough to fit on keychain (but you might want to try the M3-3313 Micro Remote - it's even smaller)
• Marantec M3-2312 Remote includes clip, battery and programming jumper (to program a M3-2312 remote to another M3-2312 remote or M3-631 Keyless)
• The M3-2312 can be programmed to control two Marantec garage door openers
• Programming instructions using the jumper included. We also include instructions on programming the remote using the control buttons on the powerhead (just in case you don't have another remote to use the programming jumper)
• NOTE: PLEASE MAKE SURE YOU ARE ORDERING THE CORRECT MHZ FREQUENCY REMOTE - if you have an existing remote look on the back and you will see the printed MHz - it MUST be 315MHz or it wont work. The older 40MHz and 390MHz remotes are no longer available. A separate Marantec Plug-in Receiver will need to be added for the new remotes to work. Please email us if you have any questions.

Click the link below to watch a video on how to transfer the code from a new "M3" style remote to another "M3" remote, program the "M3" remote using the program buttons on the operator or to transfer the code from an older "ML" style remote to a newer "M3" remote.

Programming a Marantec Video